Smart Pro Opener - Sectional Door Automation

Overview

The Smart Pro Opener is an advanced sectional door automation system designed for residential and commercial garage door applications. It represents a modern solution for automatic garage door operation with integrated smart home connectivity capabilities.

Key Features

Smart Connectivity

The Smart Pro opener includes a Smart Hub that is already integrated into the system, enabling sophisticated smart home automation. This connectivity allows users to:

• Control the door remotely through smartphone applications
• Integrate with home automation networks
• Monitor door status from anywhere
• Manage access control through wireless systems

Safety Systems

The Smart Pro incorporates multiple layers of safety protection:

• Intelligent Safety System (ISS): When contact is made with an obstruction while the door is moving, the opener either stops or reverses the door to reduce injury to persons and damage to property
• Safety Beam Alignment: The system requires proper safety beam alignment as part of installation procedures
• Safety Obstruction Force Detection: Automatically detects obstructions and prevents continued door operation
• Photo Electric (PE) Beam Integration: Compatible with PE Assist Safety Beams that enable the opener to beep when aligning beams, making installation easier and neater

Performance Capabilities

• DC Motor Technology: Delivers comparable power to older AC motors while operating with less noise and vibration
• Soft Start/Soft Close: Ramps speed up and down at the start and end of each cycle, reducing stress on the door and operator for longer operational life and quieter performance
• Door Profiling: Automatically learns the unique force requirements throughout each open and close cycle and adjusts power delivery accordingly
• Multiple Door Speed Options: Default speed settings accommodate the majority of door types with adjustable capabilities

Operational Features

• Vacation Mode: Locks out all but one master transmitter, preventing door operation until you return
• LED Courtesy Lights: High-efficiency LEDs provide bright garage illumination with dimming functionality
• Battery Backup: Charging from mains power, automatically takes over during power failures
• Auxiliary Output: Can activate other devices such as existing garage door openers or alarm systems
• Auto-Close Mode: When selected with PE Beams installed, allows automatic closing upon entering or exiting the garage

Remote Control Options

The Smart Pro supports multiple control methods:

• Smartphone app control via Smart Hub connectivity
• Wireless keypad entry
• Hand-held transmitters with programmable capabilities
• Wall-mounted control units
• Emergency manual operation capability

Installation Requirements

Installation of the Smart Pro requires:

• Professional installation by qualified garage door opener installers
• Safety beam alignment during setup
• Proper positioning in a dry, weather-protected location
• Connection to properly earthed three-pin single-phase power supply
• Compliance with relevant building and electrical codes

Safety Considerations

The Smart Pro is designed with comprehensive safety protocols:

• Photo Electric Beams must be fitted correctly and tested at regular intervals
• All safety rules must be followed, especially when using auto-close mode
• The system is not intended for unsupervised use by young children or infirm persons
• A twelve-month warranty covers the equipment under normal use and proper installation

References

• [1] 165023_02-esy-shutter-installation-manual.pdf
• [3] ata-rolling-door-openers-trade-reference-guide_low-res.pdf
• [5] bd-smart-pro-opener-installation-guide-manual.pdf
• [7] 161090_01-wpe3v2-online-installation-manual.pdf