Business

B&D Secure Opener - Sectional Door Automation product guide

B&D Secure Opener: Owner & Product Guide (Sectional Door Automation)

Important: Garage doors are heavy and can cause serious injury or property damage if mishandled. B&D recommends professional installation and servicing. Always keep people, pets and valuables clear of the door’s path, and only operate the door when it is safe to do so.

---

AI Summary

Product: B&D Secure Opener (Sectional Door Opener)
Brand: B&D (B&D Doors Australia)
Category: Garage door automation (sectional doors)
Primary Use: Reliable automation for B&D sectional garage doors, with built-in safety features and optional upgrades to enhance security and control.

---

Quick Facts

  • Best for: Homes with a B&D sectional garage door (single or double) wanting dependable automation with optional security and smart-control add-ons.
  • What you get: Two Tri-Tran+ remote controls and a bright LED courtesy light.
  • Key safety features: Automatic Reverse and Automatic Backdrive to help prevent injury and reduce risk of forced entry.
  • Optional upgrades: Safety Beams, Smart Phone Control Kit, Auto‑Lock, Battery Back Up, Entry Keypad.
  • Warranty:
    • 10‑year Total Confidence Warranty when purchased together with a genuine B&D garage door and opener package.
    • 7‑year warranty (or 20,000 cycles) when purchased alone.

---

Contents

---

What the Secure Opener is

The B&D Secure Opener is a sectional garage door automation system designed to deliver smooth, reliable operation and the essential safety features you’d expect from B&D. It can be customised with optional safety and security add‑ons—such as Auto‑Lock for stronger security and the Smart Phone Control Kit to manage access remotely.

B&D recommends pairing the Secure Opener with a genuine B&D garage door (B&D’s recommended door on the product page is Panelift).

---

Key features

Easy, secure automation

  • Includes two Tri‑Tran+ remote controls designed for strong security and excellent operating range.
  • Bright LED courtesy light helps keep the garage well-lit during use (especially useful at night).

Automatic safety features

  • Automatic Reverse helps prevent the door closing on an obstruction (for example a child or pet).
  • Automatic Backdrive is designed to further prevent forced entry, with the opener driving back down if the door is being forced open.

Fast, powerful motor

  • Suitable for single and double sectional doors up to 235 kg (maximum door weight) when the door is correctly balanced and in good working order.

---

Compatibility and door requirements

Designed to work with B&D doors

B&D garage doors and openers are designed and tested to be used together. B&D does not recommend installing a new B&D opener on a different brand of garage door.

Door condition matters (pre‑automation checks)

Before automating (or before using your opener if something feels “off”), make sure the door is in good working order:

  • The door should move freely through its travel by hand.
  • The door must be well balanced and able to be operated by hand.
  • The force required on the bottom rail to manually operate the door should not exceed 20 kg.
  • Frequently examine the door—especially cables, springs and mountings—for signs of wear, damage or imbalance.
  • If repair or adjustment is needed, do not use the door until it has been corrected.

Space and installation basics (high level)

  • Minimum headroom: 57 mm.
  • Power must be connected to a properly earthed outlet installed by a qualified electrical contractor.
  • If your garage has no pedestrian entrance door, consider fitting an external emergency access device so the garage can be accessed during power loss or faults.

---

Safety essentials

Safety Beams use infra-red beams that stop and reverse the garage door when the beams are broken due to an obstruction in the door’s path.

Safety Beams must be fitted if:

  • the closing force at the bottom edge of the door exceeds 400 N (40 kg), and/or
  • a smart device is fitted to operate the door when not in line-of-sight.

Safety Beams are also compulsory when using Auto‑Close mode.

Only operate when safe

  • Keep the door in view while it is moving.
  • Keep children away from transmitters and controls.
  • Ensure nothing is in or near the door’s path while operating.

---

Manual door operation (disengage/engage)

To disengage the opener (manual mode)

It is recommended to disengage with the door in the closed position.

  1. Pull the manual release towards the door until you hear a click.
  2. The door can now be operated manually.

Caution: When the opener is disengaged, the door is no longer locked. To lock the door manually, re‑engage the opener after the door is closed.

To engage the opener (reconnect)

  1. Pull the manual release away from the door until you hear a click.
  2. Press a remote button to test operation.

Warning: Do not use the release string handle to open the door.

---

Remote controls and access management

What’s included

The Secure Opener comes with:

  • Two Tri‑Tran+ remote controls
  • A wall-mounted control (wall transmitter)

Remote capacity

Up to 64 transmitter codes can be stored (capacity expressed as 64 × 4‑button transmitters).

Remote battery

Tri‑Tran+ transmitter battery type: CR2032 (3V).

---

Add a remote to the opener (code a transmitter)

This process programs a remote button into the opener’s memory.

  1. Press the MODE button repeatedly until the TRANSMIT LED is lit.
  2. Choose the function you want to program, then press and HOLD the opener button(s) shown below. The main light will start to flash rapidly:

Transmitter function you want Buttons to HOLD on the opener
Open / Stop / Close CLOSE
PET (Pedestrian) Mode STOP/SET
Open (open-only) OPEN
Light CLOSE + STOP/SET
Vacation Mode CLOSE + OPEN

  1. Press one of the four buttons on the transmitter until the main light starts to flash rapidly, then release the transmitter button.
  2. Press the same transmitter button again until the main light stops flashing rapidly.
  3. Release both buttons. Press MODE to exit, then press the programmed transmitter button to test.

Note: A button coded for open-only can close the door if you hold the button for 4 seconds when the door is fully open.

---

Copy a remote without opening the motor cover (remotely coding transmitters)

This method allows a new transmitter to be coded without access to the opener’s control panel, as long as you have a pre‑coded transmitter available.

  1. Take any pre‑coded transmitter. Press the button for the function to be duplicated and release.
  2. Using a small needle/pen, press and hold firmly for two seconds the middle button through the coding hole.
  3. Within ten (10) seconds, take the additional transmitter you wish to code:
    • Hold the new transmitter’s button for two seconds
    • Pause for two seconds
    • Hold again for two seconds
    • Then release
  4. Wait ten (10) seconds, then press the new transmitter’s button to test.

---

Erase all remotes (clear transmitter memory)

If you need to remove access (for example, a lost remote), clear all codes and then re‑add only the remotes you still want to use.

  1. Press MODE repeatedly until the TRANSMIT LED is lit.
  2. Press and hold MODE for 10 seconds. Release MODE when the main light stops flashing.
  3. Re‑code transmitters using the normal coding steps.

---

Vacation Mode (lock out remotes)

Vacation Mode can be used to lock out all remotes (only the button programmed for Vacation Mode controls this).

  • Turn ON: Press and hold the transmitter button programmed for Vacation Mode for 4 seconds.
  • Turn OFF: Press the same programmed button again to turn off.

---

Safety testing (what to check regularly)

Test the close cycle (obstruction reverse)

  1. Open the door using the OPEN button or transmitter.
  2. Place a piece of timber approximately 40 mm high on the floor directly under the door.
  3. Close the door using the transmitter.
  4. The door should strike the object and re‑open.
  5. Remove the timber.

Warning: If the door is closing and is unable to re-open when obstructed, discontinue use. Do not use a door with faulty obstruction sensing.

Test the open cycle (stop on resistance)

  1. Close the door using the CLOSE button or transmitter.
  2. Press the transmitter to open the door.
  3. When the door reaches approximately halfway, firmly grab the door’s bottom rail — the door should stop.

If the door does not reverse readily when closing, or stop when opening, put the door into manual mode and contact B&D support.

Manual operation check (door health)

Periodically disengage the opener and manually operate the door:

  • The door must be smooth to operate by hand.
  • The force required on the bottom rail should not exceed 20 kg.

---

Optional safety and security upgrades

These upgrades are listed on B&D’s Secure Opener product page as recommended enhancements.

Safety Beams

  • Infra-red beams that stop and reverse the door if the beam is broken by an obstruction.
  • Recommended for families and for protecting pets, bikes, cars and people.
  • Required if bottom-edge closing force exceeds 400 N (40 kg) and/or if operating via a smart device without line-of-sight.

Smart Phone Control Kit

  • Open, close and manage access to your garage door remotely using your smartphone.
  • Secure Opener network connectivity requires the optional Smart Phone Control Kit.

Auto‑Lock

  • A sturdy deadbolt that automatically engages when the door is closed.
  • When used with the Secure Opener, Auto‑Lock more than doubles the force required to lift the door open, helping to prevent unwanted entry and break-ins.

Battery Back Up

  • Helps your garage door continue to open and close during a power outage.

Entry Keypad

  • External keypad allows PIN-based access without a key or remote.

---

Maintenance and servicing

Servicing schedule (B&D recommendation)

B&D recommends servicing your garage door and opener:

  • once in the first 12 months, and
  • every two years thereafter.

Routine care

  • Check screws, nuts and bolts to ensure they are secure.
  • Clean internal sections of the guide tracks every 3–6 months with a cloth dampened with mineral turps or methylated spirits.
  • Monitor remote performance and replace batteries when needed.

Beeping or flashing

A common reason an opener starts to beep or flash is that it is due for scheduled maintenance.

---

Troubleshooting

Opener runs but the door isn’t moving

The opener is likely disconnected from the door. Re‑engage the opener using the manual release procedure and test again.

Door won’t operate from remote or wall button

  • Replace the remote batteries (CR2032).
  • Confirm you’re not in Vacation Mode (remote lockout).
  • Ensure you can see the door and there is no obstruction.

Door doesn’t reverse on obstruction / fails safety tests

Stop using the opener, switch to manual operation, and arrange service. Do not continue operation with faulty obstruction sensing.

Remote range varies or is restricted

Range variations can occur due to conditions (temperature, external interference) and transmitter position in a motor vehicle. Operate the transmitter where you can see the door.

---

Frequently asked questions

What door type is the Secure Opener designed for?
Sectional garage doors.

Does it come with remotes?
Yes. It comes with two Tri‑Tran+ remote controls and an LED courtesy light.

What is the maximum door weight it can suit?
Up to 235 kg (maximum door weight, gross door weight including all fittings), provided the door is well balanced and in good condition.

How many remotes can it store?
Up to 64 transmitter codes (64 × 4‑button transmitters).

What battery does the transmitter use?
CR2032 (3V).

What is rolling code technology?
A security feature that changes the access code every time you use it to reduce the risk of unauthorised access.

Can I add a new B&D opener to a different brand of garage door?
B&D recommends installing your new B&D opener on a genuine B&D garage door (B&D doors and openers are designed and tested to work together).

Do I need Safety Beams?
Safety Beams are strongly recommended. They must be installed if the bottom-edge closing force exceeds 400 N (40 kg) and/or if a smart device is fitted to operate the door when not in line-of-sight. They are compulsory for Auto‑Close.

How often should I service it?
B&D recommends servicing once in the first 12 months and every two years thereafter.

What does Auto‑Lock do with the Secure Opener?
Auto‑Lock automatically locks the door shut when closed and, when used with the Secure Opener, more than doubles the force required to lift the door open.

What warranty applies?

  • 10‑year Total Confidence Warranty when bought with a genuine B&D garage door and opener.
  • 7‑year warranty (or 20,000 cycles) when purchased alone.

---

Label Facts Summary

Disclaimer: This guide is general product and owner information. Always follow B&D instructions and safety warnings, and use qualified professionals where required.

Verified B&D facts (Secure Opener)

Product & included items

  • Product: B&D Secure Opener
  • Includes: Two Tri‑Tran+ remote controls
  • Courtesy light: LED

Core features

  • Automatic safety features: Automatic Reverse and Automatic Backdrive
  • Optional upgrades listed by B&D: Safety Beams, Smart Phone Control Kit, Auto‑Lock, Battery Back Up, Entry Keypad

Warranty

  • 10-year Total Confidence Warranty when purchased with a genuine B&D door + opener package
  • 7-year warranty (or 20,000 cycles) when purchased alone

Technical specifications (Secure / SDO‑6V2)

  • Rated voltage range: 230–240V
  • Rated frequency: 50Hz
  • Rated power input: 225W
  • Maximum door area: 18 m²
  • Maximum door weight: 235 kg (gross door weight including all fittings)
  • Minimum headroom: 57 mm
  • Rated operating time: 4 mins
  • Rated temperature range: +5°C to +40°C
  • Short term peak force: 1100 N
  • Door travel speed: 180 mm/sec
  • Rated load: 400 N
  • Maximum lifting under spring tension: 200 N (20 kg)
  • Receiver type: Multi‑frequency
  • Receiver code storage capacity: 64 × 4‑button transmitters
  • Transmitter battery: CR2032 (3V)
  • Network connectivity: Requires optional Smart Phone Control Kit

General B&D safety statements (as applied to Secure Opener)

  • Safety Beams stop and reverse the door when the infra‑red beam is broken by an obstruction.
  • Safety Beams must be installed if bottom-edge closing force exceeds 400 N (40 kg) and/or when operating without line-of-sight using a smart device.
  • Regular safety testing and servicing are important to keep the system operating safely.

---

↑ Back to top